Product Description

Ritron RIB-700DMR Radio-To-Intercom BridgeTM Receiver - Connect 2-Way Radios To a Wired PA System

The Ritron Radio-To-Intercom Bridge receiver connects to your wired PA/Intercom system amplifier. This clever device allows authorized 2-way radios to make PA announcements over your existing wired speaker system.  Ritron RIB-700DMR communicates with UHF or VHF DMR Standard Digital Two Way Radios.  The Ritron RIB-600A provides interconnection to the Public Address amplifier through a high impedance, unbalanced AUX input, or a 600 Ω, balanced MIC input.  Ritron RIB-600A Radio-to-Intercom Bridge Receivers are compatible with other brand 2-way radios, using the same DMR Digital technology and operating in VHF or UHF frequency band.  

Key Features of the Ritron RIB-700DMR Radio to Intercom Bridge Include:

• The Radio-To-Intercom Bridge is designed to be connected to an existing PA/intercom system with its own PA amplifier and wired speakers.
• "Record and Play" allows use of radios in close proximity to PA speakers without feedback. The Radio-To-Intercom Bridge records/buffers received messages up to 24 seconds in length, then plays them over the PA immediately after releasing the PTT button on the radio.
• Easy "Plug and Play" installation.
• Designed & Made in the United States

We Educate ... You Decide why the Ritron RIB-700DMR Radio to Intercom Bridge is Right For You!

Is this a good safety tool for a school?  Yes, you can use your walkie talkie to make an announcement over the intercom without having to be near the intercom.

Am I transmitting from the Ritron RIB-700DMR in real time?  No, to eliminate the chance of audio distortion, you speak into your radio and then stop transmitting.  The Ritron RIB 700-DMR will then rebroadcast your message.  

Is this easy to install?  Yes, the Ritron RIB700-DMR simply plugs into an RCA jack on your intercom system.